Enmet GSM-60 Instrukcja Użytkownika Pobierz pdf (Strona 7)

GSM-60 ENMET Corporation

2.3 Circuit Board Features

The Display Panel is hinged on the left and is released by unscrewing the 2 screws located in the right corners. After releasing

the panel, it is swung to the left, exposing the interior of the enclosure. The Circuit Board is mounted at the back surface of the

enclosure interior. Features are shown in Figure 2.

Feature Description

Relay Terminals

This group of terminals is located at the left side of the Circuit Board.

For the contacts for each of four alarm relays, and for the contacts of a fault relay.

Output Terminals

One 4-20mA output per active channel. 2 channels/outputs per connector.

HC Manifold

Sensor Manifold

The PiD sensor is installed into this housing.

The sample manifold, the carbon monoxide, carbon dioxide and oxygen sensors are

located under this housing.

Filter, Particulate

Removes contaminate from air sample line.

Sensor Terminals

J16, J18, J19

Sensor/Transmitter connectors 24V

4-20mA Input

Figure 2: GSM-60

Interior Features

Pow

er Input

Terminal J23

Audio Alarm

Sensor PiD (HC)

Manifold

Relay Terminals

(6 places)

Sensor/Transmitter

Terminals

J16, J18, J19

Horn Terminal

Fuse Holders

1.0 Amp

Flow Sensor

Sensor

Manifold

Digital Communication

Terminals

Ground Screw

J21

Input Port Fitting

–

20mA Output

Terminals

4 places

Sampling Pump

Location

Particulate Filter

Output Port Fitting

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Komentarze do niniejszej Instrukcji

Brak uwag

Enmet GSM-60 Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Enmet GSM-60