Enmet CP-60 Instrukcja Użytkownika Pobierz pdf (Strona 12)

CP-60 ENMET Corporation

4.5 Display

In clean air a display is shown in Figure 4.

This position of the display is termed the "operational display". As explained below,

the display can be changed to furnish other information by using the OPTION and SELECT switches.

4.6 Operational Menu

The operational menu allows the user to:

 View alarm set point concentration values

 View alarm latching configurations

 Enter the maintenance menu with the proper Password.

The operational menu is accessed with the OPTION and SELECT switches. The operational menu flow chart is shown in

Figure 7,

 Pressing the OPTION switch is indicated with a "O"

 Pressing the SELECT switch is indicated with a "S".

If the instrument is left at any location in the operational or maintenance menus, other than the operational display, with no

action taken for a period of 45 seconds, it returns to the operational display.

Figure 7: CP-60

Operation Menu Flow Chart

4.7 Fault Indications

Fault indication occurs:

 When a transmitter is not connected to an active channel of the CP-60.

 When a connected Sensor/Transmitter reading falls out side of its operation parameters (See sensor/transmitter manual).

O = Press Option switch

S = Press Select switch

Function

vL17 A2 v17

vD17

Function

See Maintenance Menu Diagram

for each active channel

Displays are examples:

6 – Indicates relay is engaged

Displays are examples of Alarms

- Indicates alarm triggered on increasing

value of reading

v - Indicates alarm triggered on decreasing

value of reading

Displays are examples of Alarms

L – Indicates alarm is in latching mode. Note:

Factory setting for alarms is latching

(no L present) – Indicates alarm is in non-

latching mode.

Displays are examples of Alarms

D – Indicates alarm is in Differential Setting.

(no D present) – Indicates alarm is in Standard

Setting.

Function

Alternating

Function

CH-1 CH-3

CH-2

Relays 123456

6=ON



CH1 SCALE

(O2)

0.0 – 30.0%

CH2 SCALE (O2)

0.00 – 30.0%

CH3 SCALE

(O2)

0.0 – 30.0 %

vL19.5 A1 vL19.5

vD 19.5

ALARM1 Delays

(Seconds)

30 mASPAN 30.0

5 5

Enter Password

Enter Maint Menu

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Komentarze do niniejszej Instrukcji

Brak uwag

Enmet CP-60 Instrukcja Użytkownika Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Enmet CP-60