Enmet PID-Guard Instrukcja Użytkownika Pobierz pdf (Strona 3)

PID-G

UARD

ENMET Corporation

1.0 Introduction

The PID-G

UARD

is a compressed air monitoring instrument that measures and detects Hydrocarbons in industrial compressed

air systems utilizing a photoionization sensor. Hydrocarbons (HC) are limited to gases with an ionization potential of 10.6 eV

or less. See Appendix A for a list of gases and IPs. The PID-G

UARD

is N

in an enclosure rated for use in a Class I, Div 1,

Groups B, C, D classified area and C

be installed in a hazardous location.

Features of the PID-G

UARD

 continuous monitoring of the sample air

 continuous LCD display of gas and vapor concentrations

 menu driven operational and maintenance controls

 menu driven calibration procedure

 audio and visual alarms indicate unsafe conditions

 alarm relay contacts available on terminals

 a fault relay and visual fault alarm

 low air flow fault indication and display

 alarm acknowledgement capability including audio defeat

 mA outputs for target gas

OTE

: All specifications stated in this manual may change without notice.

1.1 Unpack

Unpack the PID-G

UARD

and examine it for shipping damage. If such damage is observed, notify both ENMET customer

service personnel and the commercial carrier involved immediately.

Regarding Damaged Shipments

OTE

: It is your responsibility to follow these instructions. If they are not followed, the carrier will not honor

any claims for damage.



This shipment was carefully inspected, verified and properly packaged at our company and delivered to the carrier in

good condition.



When it was picked up by the carrier at ENMET, it legally became your company’s property.



If your shipment arrives damaged:

• Keep the items, packing material, and carton “As Is.” Within 5 days of receipt, notify the carrier’s local office and

request immediate inspection of the carton and the contents.

• After the inspection and after you have received written acknowledgment of the damage from the carrier, contact

ENMET Customer Service for return authorization and further instructions. Have your Purchase Order and Sales Order

numbers available.



ENMET either repairs or replaces damaged equipment and invoices the carrier to the extent of the liability coverage,

usually $100.00. Repair or replacement charges above that value are your company’s responsibility.



The shipping company may offer optional insurance coverage. ENMET only insures shipments with the shipping

company when asked to do so in writing by our customer. If you need your shipments insured, please forward a written

request to ENMET Customer Service.

Regarding Shortages

If there are any shortages or questions regarding this shipment, please notify ENMET Customer Service within 5 days of

receipt at the following address:

ENMET Corporation

680 Fairfield Court

Ann Arbor, MI 48108

734-761-1270 734-761-3220 Fax

1.2 Check Order

Check, the contents of the shipment against the purchase order. Verify that the PID-G

UARD

is received as ordered. Each PID-

UARD

is labeled with its target gas. If there are accessories on the order, ascertain that they are present. Check the contents of

calibration kits. Notify ENMET customer service personnel of any discrepancy immediately.

1.3 Serial Numbers

Each PID-G

UARD

is serialized. These numbers are on tags on the equipment and are on record in an ENMET database.

1 2 3 4 5 6 7 8 ... 25 26

Komentarze do niniejszej Instrukcji

Brak uwag

Enmet PID-Guard Instrukcja Użytkownika Strona 3

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Enmet PID-Guard