Enmet RECON-IS Instrukcja Użytkownika Pobierz pdf (Strona 6)

RECON-IS ENMET

3.0 RECON-IS Operation

3.1 Turn On RECON-IS

Press and hold the button for 3 seconds, the detector will turn on. After this, the detector will start a following self test:

Example: RECON-IS CO

A. Display all the fields and graphs and light the backlight.

B. The buzzer gives sound.

C. The vibration and alarm indication pulse.

D. Display the version number:

E. Display the preset low alarming value and the high alarming value:

F. Display STEL and TWA levels:

G. Warm-up Completion:

After passing the self test, the detector starts warm-up, display shows 3, 2, 1. The unit is now operational and

mentoring for the target gas concentration in the area:

If the self test fails, the RECON-IS will turn off automatically. Please contact the ENMET for information.

3.2 Turn Off RECON-IS

In the normal monitoring status, hold the button till the buzzer gives sound 3 times and the screen displays “OFF”, “OFF3”,

“OFF2” and “OFF1” as shown in the following pictures:

After that, the screen is off. Release the button and the detector will be power off.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Brak uwag

Enmet RECON-IS Instrukcja Użytkownika Strona 6